Secure The Router Transport Platform To The Router - Juniper MX2010 3D Quick Start Manual

MX2010 3D Universal Edge Router Quick Start
28
Using a number 3 Phillips screwdriver tighten the captive screws to secure the router
7.
transport mounting plate and wheel assembly to the chassis.
Align the right router transport mounting plate and wheel assembly (indicated by right
8.
arrow) with the holes on the right side of the chassis (see
Using a number 3 Phillips screwdriver tighten the captive screws to secure the router
9.
transport mounting plate and wheel assembly to the chassis.
Figure 21: Installing the Router Transport Kit onto the MX2010 Router

Secure the Router Transport Platform to the Router

Ensure that the rack is in its permanent location and is secured to the building. Ensure
1.
that the installation site allows adequate clearance for router transport kit turn ratios,
airflow, and maintenance.
Using the shipping crate door as a ramp, secure the door to the crate platform using
2.
the two metal latches (see Figure 22 on page 29).
Copyright © 2014, Juniper Networks, Inc.
Figure 21 on page 28).