Juniper MX2010 3D Quick Start Manual page 11

Copyright © 2014, Juniper Networks, Inc.
Figure 6: Mounting Hardware for a Four-Post Rack or Cabinet
Front
NOTE: There must be a minimum of 45-U unobstructed front-to-back usable
rack space when installing the MX2010 router into a four-post rack or cabinet.
NOTE: If you are installing the MX2010 router into a network cabinet, make
sure that no hardware, device, rack, or cabinet component obstructs the 34-U
rack space from access during installation.
Install the Mounting Hardware
24 in. (60.96 cm)
to 30 in (76.2 cm)
11