Table of Contents
Advertisement
Copyright © 2014, Juniper Networks, Inc.
NOTE:
The router transport kit handles can be removed to accommodate
aisle width.
Adjust the height of the router by turning the handles clockwise until the router
3.
transport platform is approximately 0.75 in. above the bottom of the rack opening
(see
Figure 26 on page
NOTE:
Due to the short lift capability of the router transport kit, we
recommend that you install the router on the bottom of the rack.
NOTE:
Make sure the bubbles within the T-shaped levels are between
the lines, indicating the router is level.
Adjust the four leveling mounts on the router transport platform until all four leveling
4.
mounts rest firmly on the ground (see
Use the Router Transport Kit to Install the Router In an Open-Frame Rack
34).
Figure 30 on page
40).
39
Advertisement
Table of Contents
