Step 3: Install The Router; Unpack The Router - Juniper MX2010 3D Quick Start Manual

MX2010 3D Universal Edge Router Quick Start

Step 3: Install the Router

Unpack the Router

12
Unpack the Router on page 12
Remove Components on page 14
Install the router using one of the following procedures:
Install the Router Using a Pallet Jack with Attachment on page 19
Install the Router Using a Router Transport Kit on page 24
The router is shipped in a wooden crate. A wooden pallet forms the base of the crate.
The router chassis is bolted to this pallet. A large rack mount tray, pallet jack attachment,
EMI cover, and a cardboard accessory box are also included in the shipping crate.
Before removing the router from the shipping crate, you must remove all components
(see "Remove Components" on page
Because of the router's size and weight—up to 985 lb (446.79 kg) depending on
configuration—we strongly recommend that you install the router using a pallet jack with
pallet jack attachment.
14).
Copyright © 2014, Juniper Networks, Inc.