Table of Contents
Advertisement
Copyright © 2014, Juniper Networks, Inc.
NOTE:
A minimum of 42 in. (106.7 cm) of circular space is required to
rotate the chassis.
NOTE:
The router transport kit handles can be removed to accommodate
aisle width.
Install the winch mount bracket to the rear rack rails using the six captive screws, and
3.
tighten (see
Figure 25 on page
Figure 25: Installing Winch Mount Bracket to Rack Rails
Adjust the height of the router by turning the handles clockwise until the router
4.
transport platform is aligned with the surface of the mounting shelf and slightly higher
than the mounting shelf (see
NOTE:
Make sure the bubbles within the T-shaped levels are between
the lines, indicating the router is level.
Use the Router Transport Kit to Install the Router in a Four-Post Rack
33).
Figure 26 on page
34).
33
Advertisement
Table of Contents
