Table of Contents
Advertisement
Copyright © 2014, Juniper Networks, Inc.
Using a number 3 Phillips screwdriver, loosen the captive screws that secure the router
8.
transport mounting plates and wheel assembly to the chassis, and set them aside
(see
Figure 27 on page
Figure 27: Remove Router Transport Mounting Plate and Wheel Assembly
Attach the winch strap to the winch strap plate at the rear of the router (see
9.
Figure 28 on page
36).
Use the Router Transport Kit to Install the Router in a Four-Post Rack
35).
35
Advertisement
Table of Contents
