Secure The Router To The Transport Platform - Juniper MX2008 Quick Start Manual

MX2008 3D Universal Edge Router Quick Start
28
Using a number 3 Phillips screwdriver, tighten the captive screws to secure the router
7.
transport mounting plate and wheel assembly to the chassis.
Align the right router transport mounting plate and wheel assembly (indicated by right
8.
arrow shown on the assembly) with the holes on the right side of the chassis (see
Figure 20 on page 28).
Using a number 3 Phillips screwdriver, tighten the captive screws to secure the router
9.
transport mounting plate and wheel assembly to the chassis.
Figure 20: Installing the Router Transport Kit onto the MX2008 Router

Secure the Router to the Transport Platform

Ensure that the rack is in its permanent location and is secured to the building. Ensure
1.
that the installation site allows adequate clearance for router transport kit turn ratios,
airflow, and maintenance.
Secure the door of the crate platform by using the two metal latches (see
2.
Figure 21 on page 29).
Copyright © 2017, Juniper Networks, Inc.