Table of Contents
Advertisement
Copyright © 2014, Juniper Networks, Inc.
Figure 22: Securing the Crate Door to the Shipping Crate Platform
NOTE:
An empty MX2010 weighs approximately 234 lb (106.14 kg).
Using a two person team on either side of the chassis, turn the handles on the router
3.
transport 4-5 times until the chassis is raised approximately 1 in. (2.54 cm), making
sure that the chassis is level.
NOTE:
The router transport kit is equipped with four T-shaped levels on
top of each of the four router transport mounting brackets. Make sure the
bubbles within the T-shaped levels are between the lines, indicating the
chassis is level.
CAUTION:
Do not raise the chassis above 1 in. (2.54 cm). This will ensure
the router will not tilt when transporting, which can result in injury or
damage to the router.
Turn the four wheels on the router transport kit toward the rear of the chassis.
4.
Grasping the handles on the shipping covers, carefully guide the chassis down the
5.
crate ramp to the rack location.
Secure the Router Transport Platform to the Router
29
Advertisement
Table of Contents
