Juniper MX2010 3D Quick Start Manual page 32

MX2010 3D Universal Edge Router Quick Start
32
Install the winch strap plate to the rear of the router by tightening the four captive
1.
screws (see Figure 24 on page
Figure 24: Installing Winch Strap Plate (Four-Post Rack)
Using a four person team, transport the router to the rack installation location and
2.
center it in front of the mounting shelf.
NOTE: A minimum of 38 in. (96.5 cm) of clearance is required to roll the
chassis sideways.
32).
Copyright © 2014, Juniper Networks, Inc.