Install The Router Transport Kit Onto The Router - Juniper MX2010 3D Quick Start Manual

MX2010 3D Universal Edge Router Quick Start
26
Remove the top and front of the shipping crate, and set them aside.
4.
Remove the two wing nuts that secure the wooden brace to the shipping crate
5.
platform, and set them aside.
Align the crate door with the shipping crate platform, and secure the door to the
6.
platform using the attached velcro straps (see
Figure 19: Router Transport Kit Shipping Crate Door
Crate door/ramp
Remove the router transport kit from the shipping container.
7.
Remove the vapor corrosion inhibitor (VCI) packs attached to the pallet, being careful
8.
not to break the VCI packs open.
Save the shipping crate cover, pallet, and packing materials in case you need to move
9.
or ship the router transport kit at a later time.

Install the Router Transport Kit onto the Router

NOTE: The router transport kit be purchased from Juniper Networks.
The router transport kit includes the following components:
Router transport platform
Router transport left and right mounting plates with adjustable wheel assembly
Figure 19 on page 26).
Copyright © 2014, Juniper Networks, Inc.