Figure B-10 Cab-Mmf-Lc-Y (72-3811-01) Cable; Figure B-11 Cab-Rbbn-16-T1E1 Cable; Table B-33 Location Of Cable Illustrations In This Appendix - Cisco MGX MGX 8800 Hardware Installation Manual

Illustrated Cable Guide
Table B-33
Cable Name
CAB-RBBN-16-T1E1
CAB-RBBN-16T1E1-Y
CAB-SMFIR-LC
CAB-SMFIR-LC-Y
CAB-SMFLR-LC
CAB-SMFLR-LC-Y
CAB-MMF-LC
Figure B-9
CAB-MMF-LC-Y
Figure B-10
CAB-RBBN-16-T1E1
The CAB-RBBN-16-T1E1 cable is used on the RBBN-16-T1E1 back card. You need two cables per back
card, one TX and one RX.
Figure B-11
18
1
Cisco MGX 8800/8900 Series Hardware Installation Guide
B-38
Location of Cable Illustrations in This Appendix (continued)
CAB-MMF-LC (Multimode LC Cable) (72-3742-01)
CAB-MMF-LC-Y (72-3811-01) Cable
CAB-RBBN-16-T1E1 Cable
36
19
Cable Location in this Appendix
Figure B-10 on page B-38
Figure B-11 on page B-39
Figure B-12 on page B-40
Figure B-13 on page B-41
Not shown. See Figure B-12 on page B-40
Not shown. See Figure B-13 on page B-41
50
25
Releases 2 - 5.2, Part Number OL-4545-01, Rev. H0, May 2006
Appendix
26
1