Cisco MGX MGX 8800 Hardware Installation Manual page 34

Cisco systems switches installation guide
Hide thumbs Also See for Cisco MGX MGX 8800:
Table of Contents

Advertisement

Conventions
Conventions
This guide uses the conventions listed in this section and in
all the multiservice switches and gateways documented in this guide.
Table 1
Convention
boldface font
italic font
screen
boldface screen
font
^
[ ]
{x | y | z}
< >
Cisco MGX 8800/8900 Series Hardware Installation Guide
34
Chapter 6, "Maintaining the Cisco MGX Switch or Gateway,"
each switch or gateway.
Appendix A, "Front Card Specifications,"
Appendix B, "Cable Specifications,"
each chassis and its cards.
Appendix C, "Earthing and Bonding Recommendations,"
Cisco practices with regard to DC power, earthing, and bonding of Cisco equipment. It also explains
why these techniques are the best practice.
Appendix D, "Guide to Transceivers (SFPs) Used with MGX Back
form-factor pluggable (SFP) transceivers used with MGX back cards.
The glossary defines all acronyms used throughout this guide.
Conventions Used in this Guide
Definition
Commands and keywords are in boldface.
Also used for names of some elements in a
graphical user interface (GUI).
Arguments for which you supply values are
in italics.
Also used for publication names and for
emphasis.
font
Terminal sessions and information the
system displays are in
Information you must enter is in
font.
screen
The symbol ^ represents the Control key
labeled Ctrl.
Elements in square brackets are optional.
Also used for default responses to system
prompts.
Alternative keywords are grouped in braces
and separated by vertical bars.
Nonprinting characters such as passwords
are in angle brackets.
provides maintenance procedures for
provides technical specifications for cards and modules.
provides cabling and pinout information for cables used with
discusses the techniques and policies that
Table
1. MGX switches collectively refers to
Sample
This is similar to the UNIX
route command.
See the Regulatory Compliance and
Safety Information for Cisco
Multiservice Switch Products (MGX,
BPX, and SES) for further details.
Are you ready to continue? [Y]
font.
screen
Login:
boldface
Password: <
^D This key combination in a
screen display means hold down the
Control key while you press the
D key.
[no] offset-list {in | out} offset
offset-list {in | out} offset
Password: <cisco123>
Releases 2 - 5.2, Part Number OL-4545-01, Rev. H0, May 2006
Cards,"summarizes the small
root
>
password

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mgx 8900 series

Table of Contents