Front Card Specifications - Cisco MGX MGX 8800 Hardware Installation Manual

Front Card Specifications

This appendix provides technical specifications for cards used in Cisco MGX 8950, Cisco MGX 8850
(PXM1E/PXM45), Cisco MGX 8850/B, Cisco MGX 8830 and Cisco MGX 8830/B switches and the
Cisco MGX 8880 Media Gateway. It contains the following sections:
• Single-Height Service Module Specifications, page
Double-Height Service Module Specifications, page
•
PXM1E Specifications, page A-3
•
PXM45 Specifications, page A-5
•
RPM-PR Specifications, page A-7
•
RPM-XF Specifications, page A-8
•
SRM Specifications, page A-8
•
For information on site and safety requirements, see
Note
to the Regulatory Compliance and Safety Information for Cisco Multiservice Switch Products (MGX,
BPX, and SES) booklet that shipped with your chassis for standards and compliance information.
The information in this guide does not apply to the MGX 8850 (PXM1) switch. For information on that
switch, refer to the documentation at
http://www.cisco.com/univercd/cc/td/doc/product/wanbu/mgx8850/index.htm.
Releases 2 - 5.2, Part Number OL-4545-01, Rev. H0, May 2006
– AUSM
CESM
–
FRSM
–
MPSM
–
VISM-PR
–
AXSM
–
– FRSM-12-T3E3
VXSM
–
A P P E N D I X
A-2. These service modules include:
A-2. These service modules include:
Chapter 3, "Preparing for Installation."
Cisco MGX 8800/8900 Series Hardware Installation Guide
A
Also refer
A-1