Cisco MGX MGX 8800 Hardware Installation Manual page 244

Back Cards
Note Connecting to the auxiliary port through a modem is not supported. The auxiliary port can operate at a
user-specified baud rate (1200 to 9600 baud).
The console port can operate at a user-specified baud rate (1200 to 115200 baud). A console port speed
rate of 9600 baud is recommended.
MGX-XF-UI/B
The MGX-XF-UI/B is a management back card that provides remote management capabilities for the
RPM-XF through a console connection, an auxiliary connection, and two fast ethernet (FE) ports.
The MGX-XF-UI/B faceplate is the same as the MGX-XF-UI
Note
is "notched" to fit into the RCON of the MGX 8880 Media Gateway, directly behind the RPM-XF card.
Figure 2-57
Figure 2-57
1
1
Cisco MGX 8800/8900 Series Hardware Installation Guide
2-114
shows the MGX-XF-UI/B board.
MGX-XF-UI/B Card—Side View
Notched card, to fit into the MGX 8880
RCON
Chapter 2 Illustrated Card List for MGX Switches and the MGX 8880 Media Gateway
F -U I/ B
M G X -X
A
U
X
C
O
N
S
O
L
E
U S
S TA T
L
N
K
A
C
T
R N E T 0
E T H E
L
N
K
A
C
T
1
R N E T
E T H E
Releases 2 - 5.2, Part Number OL-4545-01, Rev. H0, May 2006
(Figure 2-56), except the board silhouette