Table 2-24 Pxm45 Cards, Interfaces, And Supported Back Cards - Cisco MGX MGX 8800 Hardware Installation Manual

Front Cards
PXM45 Support on MGX 8950
The MGX 8950 switch was introduced with PXM45/B, and can use the PXM45/B or PXM45/C card. In
an MGX 8950 switch, the PXM45/B or PXM45/C card operates with the following module types:
•
•
For a detailed list of supported modules for the MGX 8950 switch, see
Note
Table 2-24
Table 2-24
PXM45
PXM45
PXM45/B
PXM45/C
For information on PXM45 software features and configurations, refer to the Cisco MGX 8800/8900
Note
Series Configuration Guide, Release 5.2. For technical specifications for the PXMs, see the
Specifications" section on page
Cisco MGX 8800/8900 Series Hardware Installation Guide
2-58
AXSM/B, AXSM-XG
RPM-PR, RPM-XF
provides information about each PXM45 card, interface, and corresponding back card.
PXM45 Cards, Interfaces, and Supported Back Cards
Switch
MGX 8850 (PXM45) Management, clock, and
MGX 8850 (PXM45)
MGX 8950
MGX 8850 (PXM45)
MGX 8950
Chapter 2 Illustrated Card List for MGX Switches and the MGX 8880 Media Gateway
Types of Lines Supported
alarm
Management, clock, and
alarm
Management, clock, and
alarm
A-5.
Releases 2 - 5.2, Part Number OL-4545-01, Rev. H0, May 2006
Table 1-3.
Supported Back Cards
User interface back card:
PXM-UI-S3
•
Hard drive card:
PXM-HD
•
User interface back card:
PXM-UI-S3
•
Hard drive card:
• PXM-HD
User interface back card:
• PXM-UI-S3/B
Hard drive card:
PXM-HD
•
"PXM45