Cisco MGX MGX 8800 Hardware Installation Manual page 25

Figure 6-11 Two Back Cards Installed in the APS Connector (MGX 8830 Example)
Figure 6-12 Removing the Filler Bar (MGX 8830)
Figure 6-13 MGX 8850/B RCON Installation
Figure 6-14 MGX 8830/B With Filler Bars Removed
Figure 6-15 MGX 8830/B RCON Installation
Figure 6-16 MGX8950-EXTDR-CON Installation
Figure 6-17 MGX8950-EXTDR-CON Assembly
Figure B-1 Null Modem Cable
Figure B-2 Optional RJ-45 to Wire-wrap
Figure B-3 Removing the Pin Cover from the Adapter
Figure B-4 Inserting the Cable through the Pin Cover
Figure B-5 Wires Wire-Wrapped to Pins
Figure B-6 DC Power Connections on DC PEM Terminal Block-MGX 8850 (PXM1E/PXM45), MGX 8850/B, MGX 8950, and
MGX 8880
Figure B-7 RJ-48 Connector Schematic
Figure B-8 24 T1/E1 Back Card Cable Diagram
Figure B-9 CAB-MMF-LC (Multimode LC Cable) (72-3742-01)
Figure B-10 CAB-MMF-LC-Y (72-3811-01) Cable
Figure B-11 CAB-RBBN-16-T1E1 Cable
Figure B-12 CAB-RBBN-16T1E1-Y Cable
Figure B-13 CAB-SMFIR-LC (72-1932-01) Cable
Figure B-14 CAB-SMFIR-LC-Y (72-1931-01) Cable
Figure C-1 Star and Mesh Topology Examples
Figure C-2 Mixed Grounding System
Releases 2 - 5.2, Part Number OL-4545-01, Rev. H0, May 2006
20
23
26
28
29
5
8
9
14
18
23
38
38
39
40
41
5
10
25
8
8
38
Cisco MGX 8800/8900 Series Hardware Installation Guide
19
Figures
25