11 SERVICE WORK ON THE CHASSIS
11.25
11.26
64
Mounting the seat
A01097-10
A01095-10
Removing the air filter box cover
A01092-10
A01092-11
–
Attach the seat to the collar bushings at the front and simul-
taneously push it back.
The holding lugs engage in the recesses at the back.
–
Make sure the seat is latched in place correctly.
–
Mount and tighten screw
Guideline
Remaining screws,
chassis
Condition
The air filter box cover is secured.
–
1
Remove screw
.
–
Pull off the air filter box cover in area
ways and forward. Take off the air filter box cover.
1
.
M6
10 Nm (7.4 lbf ft)
A
and push it side-