12
SERVICE WORK ON THE CHASSIS
12.20
Removing the seat
12.21
Mounting the seat
12.22
Removing the air filter box lid
12.23
Installing the air filter box lid
–
Install the right side cover. (
–
Remove the motorcycle from the lift stand. (
–
Remove screws
–
Lift up the seat at the rear, pull it back, and then lift it off.
S00535-10
–
Attach the front of the seat to the collar bushing of the fuel tank and lower the seat at
the rear while pushing forward.
–
Make sure that the seat is correctly locked in.
–
Mount and tighten the screws for securing the seat.
Guideline
Remaining screws, chassis
S00536-10
–
Release catch
remove toward the rear.
L02630-10
–
Position the air filter box lid and tab
and
.
–
Engage tab
L02630-10
p. 56)
in the recessed grips on the left and right.
, pull off the air filter box lid sideways in areas
. Engage the air filter box lid in areas
.
p. 43)
M6
10 Nm (7.4 lbf ft)
and
52
and