Use printer menus
Advanced Imaging
Menu item
Color Balance
Cyan
-5 to 5 (0*)
Magenta
-5 to 5 (0*)
Yellow
-5 to 5 (0*)
Black
-5 to 5 (0*)
Reset Defaults
Color Correction
Color Correction
Auto*
Off
Manual
Color Correction Content
Color Adjust
Note: An asterisk (*) next to a value indicates the factory default setting.
PostScript
Menu item
Print PS Error
On
Off*
Minimum Line Width
1–30 (2*)
Lock PS Startup Mode
On*
Off
Description
Adjust the amount of toner that is used for each color.
Modify the color settings used to print documents.
Notes:
•
Off sets the printer to receive the color correction from the software.
Auto sets the printer to apply different color profiles to each object on the printed
•
page.
•
Manual allows the customization of the RGB or CMYK color conversions applied to
each object on the printed page.
•
Color Correction Content is available only when Color Correction is set to Manual.
Calibrate the printer to adjust color variations in the printed output.
Description
Print a page that describes the PostScript error.
Note: When an error occurs, processing of the job stops, the printer prints an
error message, and the rest of the print job is flushed.
Set the minimum stroke width.
Note: Jobs printed in 4800 CQ use half the value.
Disable the SysStart file.
Note: The default setting varies depending on the printer model.
87