Fax
Blocking junk faxes
Note: Make sure that fax is configured. For more information, see
1
From the home screen, touch Settings > Fax > Fax Setup > Fax Receive Settings > Admin Controls.
2
Set Block No Name Fax to On.
Holding faxes
Note: Make sure that fax is configured. For more information, see
1
Open a web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address on the printer home screen. The IP address appears as four sets of numbers
separated by periods, such as 123.123.123.123.
If you are using a proxy server, then temporarily disable it to load the web page correctly.
•
2
Click Settings > Fax > Fax Setup > Fax Receive Settings > Holding Faxes.
3
Select a mode.
4
Apply the changes.
Forwarding a fax
Note: Make sure that fax is configured. For more information, see
1
From the home screen, touch Settings > Fax > Fax Setup > Fax Receive Settings > Admin Controls.
2
Touch Fax Forwarding > Forward.
3
Configure the Forward to and Confirmation E-mail settings.
Setting up the printer to
Setting up the printer to
Setting up the printer to
65
fax.
fax.
fax.