Ricoh M C240FW User Manual page 99

Use printer menus
Advanced Imaging
Menu item
Color Balance
Cyan - Red
-4 to 4 (0*)
Magenta - Green
-4 to 4 (0*)
Yellow - Blue
-4 to 4 (0*)
Contrast
Best for Content*
0
1
2
3
4
5
Background Removal
Level
-4 to 4 (0*)
Scan Edge to Edge
On
Off*
Note: An asterisk (*) next to a value indicates the factory default setting.
Admin Controls
Menu item
Automatic Redial
0–9 (5*)
Redial Frequency
1–200 minutes (3*)
Enable ECM
On*
Off
Description
Adjust the color intensity during scanning.
Set the contrast of the output.
Adjust the amount of background visible on a scanned image.
Allow edge-to-edge scanning of the original document.
Description
Adjust the number of redial attempts based on the activity levels of recipient fax
machines.
Increase the time between redial attempts to increase the chance of sending fax
successfully.
Activate Error Correction Mode (ECM) for fax jobs.
Note: ECM detects and corrects errors in the fax transmission process caused by
telephone line noise and poor signal strength.
99