Ricoh M C240FW User Manual page 149

Maintain the printer
If the printer has a caster base, then carefully roll it to the new location. Use caution when passing over
•
thresholds and breaks in flooring.
Always use the handholds on the printer to lift it.
•
• Any cart used to move the printer must have a surface able to support the full footprint of the printer.
• Any cart used to move the hardware options must have a surface able to support the dimensions of the
options.
Keep the printer in an upright position.
•
Avoid severe jarring movements.
•
Make sure that your fingers are not under the printer when you set it down.
•
Make sure that there is adequate clearance around the printer.
•
Note: Damage to the printer caused by improper moving is not covered by the printer warranty.
149