Restrict External Network Access - Ricoh M C240FW User Manual

Use printer menus
Menu item
PS SmartSwitch
Off
On*
Mac Binary PS
On
Auto*
Off
Enable USB Port
Disable
Enable*
Note: An asterisk (*) next to a value indicates the factory default setting.

Restrict external network access

Menu item
Restrict external network access
Off*
On
External network address
E-mail address for notification
Ping frequency
1–300 (10*)
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Set the printer to switch to PS emulation when a print job received through a USB
port requires it, regardless of the default printer language.
Note: If PS SmartSwitch is off, then the printer does not examine incoming data and
uses the default printer language specified in the Setup menu.
Set the printer to process Macintosh binary PostScript print jobs.
Notes:
When set to On, the printer processes raw binary PostScript print jobs from
•
computers using the Macintosh operating system.
When set to Auto, the printer processes print jobs from computers using either
•
Windows or Macintosh operating systems
• When set to Off, the printer filters PostScript print jobs using the standard
protocol.
Enable the standard USB port.
Description
Restrict access to network sites.
Specify the network addresses with restricted access.
Specify an e-mail address to send a notification of logged events.
Specify the network query interval in seconds.
132