Updating Firmware - Ricoh M C240FW User Manual

Set up, install, and configure
Notes:
- View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.
- If you are using a proxy server, then temporarily disable it to load the web page correctly.
3. Select a print driver, and then click Next.
4. Select Use the print driver that is currently installed (recommended), and then click Next.
5. Type a printer name, and then click Next.
6. Select a printer sharing option, and then click Next.
7. Click Finish.
For Macintosh users
1 From a computer, open Printers & Scanners.
2 Click , and then select a printer.
3 From the Use menu, select a print driver.
Notes:
To use the Macintosh print driver, select either AirPrint or Secure AirPrint.
•
4 Add the printer.

Updating firmware

Some applications require a minimum device firmware level to operate correctly.
For more information on updating the device firmware, contact your sales representative.
1
Open a web browser, and then type the printer IP address in the address field.
Notes:
• View the printer IP address on the printer home screen. The IP address appears as four sets of numbers
separated by periods, such as 123.123.123.123.
If you are using a proxy server, then temporarily disable it to load the web page correctly.
•
2 Click Settings > Device > Update Firmware.
3 Do either of the following:
• Click Check for updates >I agree, start update.
• Upload the flash file.
1. Browse to the flash file.
2. Click Upload >Start.
46