Network Setup Options - Ricoh Fiery 3850C Configuration Manual

3
3-8 Performing Setup from the Control Panel

Network Setup options

Network Setup configures the Fiery 3850C to receive print jobs over the network
systems that will be used at your site.
In the Setup menu, choose Network Setup, where you specify network addresses and
names to be used by workstations, servers, and the Fiery 3850C when they
communicate with each other.
The Network Setup menu includes three submenus that let you choose port types,
protocols, and network services.
For each item you enable, you are prompted to enter settings for that item. Default
values, where applicable, appear in this manual with square brackets.
You need to display and select options only for the network systems that are currently
used at your site. If your network requirements change, you can change network setup
at any time.
If the Fiery 3850C is configured to enable more than one protocol, it automatically
switches to the correct protocol when it receives a print job.