Printing A Network Setup Page; Setting Up The Printer Software; Installing Printer Software; Updating Available Options In The Printer Driver - Ricoh M126 Service Manual

Printing a network setup page

If the printer is attached to a network, then print a network setup page to verify the network connection. This page
also provides important information that aids network printing configuration.
1
Make sure the printer is on and Ready appears.
2
On the home screen, touch
3
Touch Reports.
4
Touch Network Setup Page.
The network setup page prints and the printer returns to the home screen.
5
Check the first section on the network setup page, and confirm that Status is "Connected."
If Status is "Not Connected," then the LAN drop may not be active, the network cable may be malfunctioning, or,
if you have a wireless printer model, the wireless network may not be configured properly. Consult a system support
person for a solution, and then print another network setup page.

Setting up the printer software

Installing printer software

A printer driver is software that lets the computer communicate with the printer. The printer software is typically
installed during the initial printer setup. If you need to install the software after setup, follow these instructions:
For Windows users
1
Close all open software programs.
2
Insert the Software and Documentation CD.
3
From the main installation dialog, click Install.
4
Follow the instructions on the screen.
For Macintosh users
1
Close all open software applications.
2
Insert the Software and Documentation CD.
3
From the Finder desktop, double-click the printer CD icon that automatically appears.
4
Double-click the Install icon.
5
Follow the instructions on the screen.

Updating available options in the printer driver

Once the printer software and any options are installed, it may be necessary to manually add the options in the printer
driver to make them available for print jobs.
.
Additional printer setup
51