Network Communication Setup
Automatically setting TCP/IP Addresses
At the DSm520pf/AC122/AC205, perform these steps:
1
2
3
4
After a short period of time, the network will allocate the required addresses.
Print a System Data sheet to check the addresses (see Printing a System Data1-6).
5
System Administration Guide
Press [Menu] until you see
Network Setup on the top line of
the display.
Press
or
until Configure
Network is displayed and press
[Enter].
Press
or
until TCP/IP is
displayed and press [Enter].
You can use DHCP or BOOTP
to automatically configure TCP/
IP on the machine.
Press
or
until the
required setting method is
displayed and press [Enter].
8. Network Setup
[Reset Network]
8. Network Setup
[Config Network]
Config Network
[TCP/IP]
TCP/IP
[DHCP]
Page 1-5