Touch Screen Calibration
The touch screen has been calibrated at the factory before shipment.
In case you do experience misalignment with the touch targets, use
the touch screen calibration feature.
To calibrate:
1.
Push
.
2.
Push
(Instrument Settings).
3.
Push
(Tools).
4.
Push
/
to highlight Touch Screen Calibration and push
or touch the Touch Screen Calibration target.
5.
Touch the five cross hair targets as exactly as possible.
WiFi Configuration
To configure the first-time WiFi connection of a PC/smartphone/tablet
to the Logger, setup the WiFi details in the Tools screen.
To view the WiFi setup parameters:
1.
Push
.
2.
Push
(Instrument Settings).
3.
Push
(Tools).
4.
Push
/
to highlight the WiFi configuration target and push
or touch the WiFi configuration target to view the WiFi
connection details.
This feature is only available when a supported USB WiFi
Adapter is attached to the Logger.
Note
Copy Service Data to USB
If requested for customer support, use this function to copy all
measurement files in raw format and system information to a USB
flash drive.
To copy the service data:
Attach a USB flash drive with sufficient available memory (depending
on the file size of stored logging sessions, maximum 2 GB).
1.
Push
.
2.
Push
(Instrument Settings).
3.
Push
(Tools).
4.
Push
/
to highlight the Copy service data to USB target
and push
or touch Copy service data to USB target to start
the copy process.
Energy Logger
Function Selection Buttons
43