System Initialization; System Settings; Confirming The Main Terminal - Furuno Felcom 15 Operator's Manual

2.

SYSTEM INITIALIZATION

This chapter provides the information necessary for initializing the FELCOM 15.
Once the equipment is initialized, you need do no more than press a few keys to
get fully automatic transmission and reception.
Inmarsat assigns an MES an Inmarsat Mobile Number (IMN) when it applies for
Inmarsat registration. The IMN is necessary to communicate in the Inmarsat
system. It is entered into the FELCOM 15 during the installation.
2.1

System Settings

2.1.1

Confirming the main terminal

The main terminal is where you set up the system. (You cannot set up the
system from an external terminal.) Confirm that the main terminal is selected as
below.
1. Press the [F8] key to choose the Setup menu.
File
If your screen looks something like the one shown in the illustration above, you
are using the main terminal. (If you are using an external terminal, some menu
items appear in gray.)
Edit Transmit EGC
Setup
1. Distress Alert Setup
2. System Setup
3. Editor Setup
4. Terminal Setup
5. EGC Setup
6. Auto Mode Setup
7. E-Mail Setup
8. Directories
9. Configuration
Reports Logs Options
Setup menu
Setup Position StopAlarm
2-1