Furuno Felcom 15 Operator's Manual page 68

2. SYSTEM INITIALIZATION
6. Enter directory name and press the [Enter] key. Entered name appears.
Note 1: To create a directory within a directory (at step 6), repeat steps 5
Note 2: To return to the root directory, place the cursor on [. .] and press the
7. Press the [ ] key.
8. When the floppy disk drive lamp goes off, press the [Esc] key to show the
update window.
9. Yes is selected; press the [Enter] key.
10. Press the [Esc] key twice to return to the standby display. Then, received
messages (transmitted messages) are saved to the directory created above.
Note 1: To remove a directory, do steps 1-4 in the above procedure, choose the
directory to remove and then press the [Delete] key.
Note 2: A directory for EGC messages can also be made as above. In this case
choose EGC Message Directory at step 4.
2-36
Root directory
(Top of floppy disk hierarchy)
Setup
Directories
[A:\ ABC\ .
Filename
Message Directory
.
EGC M<DIR><essa>456ABC ABC281 .
. .
e <D IDirectory
5. EGC Setup
6. Auto Mode Setup
7. E-Mail Setup
8. Directories
Directory name
9. Configuration
Message directory
and 6.
[Enter] key.
Message Directory
Size Date & Time
<DIR> 2002-02-28 20:54 <DIR>
<DIR>
2002-02-15 02:13
]