Specifying Directory Where To Store Messages - Furuno Felcom 15 Operator's Manual

2.9.2

Specifying directory where to store messages

You may specify the directory where to store messages on a floppy disk as
follows:
1. Press the [F8] and [8] keys to show the Directories menu.
2. Press the [ ] key to choose Message Directory and press the [Enter] key.
3. Press the [ ] key to place the cursor on [●●].
4. Press the [Enter] key. Root directory is displayed.
5. Press the [ ] or [ ] key to choose a directory.
6. Press the [Enter] key.
7. Press the [ ] key to place the cursor on the top line ([A: ]). The floppy disk
drive lamp lights.
8. When the floppy disk drive lamp goes off, press the [Esc] key to show the
update window.
9. Yes is selected; press the [Enter] key.
10. Press the [Esc] key twice to return to the standby display.
Note: The directory where to store EGC messages can also be created. In this
case choose EGC Message Directory at step 2.
Root directory
(Top of floppy disk hierarchy)
Setup
Message Directory
Directories
[A:\ ABC\ .
Filename Size
Message Directory
・ABC281 .
<DIR>
EGC M<DIR><essa>456ABC
・・
e <DIDirectory <DIR>
5 GC Set p
Message directory
2. SYSTEM INITIALIZATION
]
Date & Time
2002-02-28 20:54 <DIR>
2002-02-15 02:13
2-37