Displaying, Printing Received Messages - Furuno Felcom 15 Operator's Manual

4.2.3

Displaying, printing received messages

Received messages (except confidential or password affixed) are automatically
printed when the Auto Receive Message Print in the Auto Mode Setup is turned
on. To print confidential or password affixed messages follow the procedure
below.
If you cannot read an e-mail attachment, because it is MIME-coded, go to
paragraph 3.10.
1. Press the [F6] key to show the Logs menu.
2. Press the [2] key to display the list of received messages.
Message No.
R0971106.001
R0971105.002
R0971105.001
R0971024.001
ENTER: Display S: Save D: Delete
Display message list description
Message No.:
LES:
Priority:
Size:
Addressee:
Rec date & time:
Status:
Memory available:
3. Press the [↑] or [ ] key to choose a file. To get a partial display of a file
selected, tap the space bar. Press the [Esc] key after confirming contents.
Logs
1. Send Message Log
2. Receive Message Log
3. EGC Log
4. Log
Logs menu
Received Message Log
LES Priority
KDDI Normal 32767
KDDI Normal
KDDI Distress
KDDI Normal
Receive message log
Received message no.
LES name
Normal or distress
Size of file in bytes
Addressee code appears for confidential messages.
Nothing appears for routine messages.
Date and time message was received.
Printed: message printed
Saved: message saved to floppy disk
No display: not yet printed confidential message, or
printer malfunction
Memory available in the terminal unit
4. INMARSAT C COMMUNICATIONS
Size Addressee Rec date & Time
02-02-06 16:10
200 CAPTAIN 02-02-05 17:30
1234 02-02-05 14:15
8251 02-01-24 13:20
Memory Available: 12345 Bytes
Status
Saved
Printed
Saved
4-25