Furuno Felcom 15 Operator's Manual page 49

7. Press the [Enter] key to open the navarea entry window.
Receive EGC Area
Additional Position
Fixed Area
Waypoint (from NAV Equipment)
NAVTEX
Station Code
Type of Message (Can't reject other report)
Ice reports
Meteo. forecasts
Pilot service
DECCA messages
LORAN messages
EGC setup menu, Navarea entry window
8. Enter additional Navarea(s) (I-XVI, up to nine) in two digits, referring to the
illustration below for code number.
9. Press the [Enter] key to close the navarea entry window.
Note: "Fixed Area" is where you enter fixed areas (max. 3) for chart
correction service. However, this service is not yet available; enter no
data.
10. Press the [ ] key to choose Waypoint.
Setup
EGC Setup
Navarea
OFF
OFF
OFF
OFF
OFF
Navareas
2. SYSTEM INITIALIZATION
: :
OFF
OMEGA messages OFF
SATNAV messages OFF
Other navaid msg OFF
QRU (no message) OFF
2-17