Saving, Printing Egc Messages Automatically - Furuno Felcom 15 Operator's Manual

2.4.4

Saving, printing EGC messages automatically

You may save and print EGC messages automatically as below.
Automatically saving EGC messages
1. Press the [F8] key to display the Setup menu.
2. Press the [6] key to display the Auto Mode Setup menu.
3. Press the [ ] or [ ] key to choose Auto EGC Message Save and then press
the [Enter] key.
4. Press the [ ] or [ ] key to choose message type and then press the [Enter]
key.
5. Choose ON or OFF as appropriate and press the [Enter] key to close the
window.
Note: When SafetyNET (Safety) is turned off, SafetyNET (Safety) on the
6. Press the [Esc] key three times to return to the standby display.
Auto Log Print
Receive Alarm
Auto Receive Message Save
Auto Receive Message Print
Data Report & Polling Print
Auto EGC Message Save
Auto EGC Message Print
Auto mode setup menu
Auto Mode Setup
Auto EGC Message Save
System
FleetNET
SafetyNET (Routine)
SafetyNET (Safety)
SafetyNET (Urgent & Distress) ON
Auto EGC message save menu
Auto EGC Message Print menu is automatically turned on.
Auto Mode Setup
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
2. SYSTEM INITIALIZATION
2-21