System Configuration - Furuno DRS12A-NXT Installation Manual

SYSTEM CONFIGURATION

*1 : Radiator XN10A only used with DRS6A-NXT.
*2
: Radiator XN13A cannot be used with 12 VDC.
Connect the antenna unit to the ship's battery via a
switchboard.
*3 : 12VDC is only used with DRS6A-NXT.
DRS12A-NXT and DRS25A-NXT are 24VDC only.
This radar series is compatible with the FURUNO Multi Function Displays and software version
combinations shown below. The combination with other models or software versions may not op-
erate properly.
• TZT9, TZT14 and TZTBB: Version 6.01 or later
TZTL12F, TZTL15F and TZT2BB: Version 6.21 or later
TZT12F, TZT16F and TZT19F: Version 1.05 or later
*2
Ship's battery
(24 VDC *3 or
*3
12 VDC )
: Standard supply
: Optional or local supply
Radiator
XN10A (3.4 ft) *1
XN12A (4 ft)
XN13A (6 ft)
RSB-137-119 (DRS6A-NXT)
RSB-137-125 (DRS12A-NXT)
RSB-137-126 (DRS25A-NXT)
Power/LAN cable
Cable assembly
Multi Function Display Multi Function Display
NavNet TZtouch/NavNet TZtouch2/ NavNet TZtouch/NavNet TZtouch2/
NavNet TZtouch3 NavNet TZtouch3
iii
Antenna Unit
Ethernet HUB
HUB-101