System Configuration - Furuno FAR-3220-NXT Installation Manual

SYSTEM CONFIGURATION

The radar(s) must be interconnected to the following type approved sensors:
EPFS meeting the requirements of the IMO resolution MSC.112(73).
Gyrocompass meeting the requirements of the IMO resolution A.424(XI).
SDME meeting the requirements of IMO resolution MSC.96(72).
The radar may be interconnected via HUB-3000 to other FURUNO processing
units having approved LAN ports.
Standard connection
Basic configuration is shown with solid line.
for FAR-3220-NXT(-BB)/3320-NXT, 600 W
(w/ Performance Monitor PM-32B)
100-115/220-230 VAC
1ø, 50-60 Hz (for de-icer)
100-230 VAC
1ø, 50-60 Hz
440 VAC
1ø, 50-60 Hz
Sensor Adapter
Radar Control Unit RCU-025
Trackball Control Unit RCU-026
ECDIS Control Unit RCU-024
Radar Control Unit RCU-025
Trackball Control Unit RCU-026
ECDIS Control Unit RCU-024
Radar Control Unit RCU-025
Trackball Control Unit RCU-026
MU-190
See the next page for foootnotes.
NOTICE
XN12CF-RSB128-123
XN20CF-RSB128-123
XN24CF-RSB128-123
Sub display
Transformer
4
or Switching HUB
HUB-100
Select one
Select one
Select one
Monitor Unit
3 3 3
MU-231 MU-270W
Digital In (ACK IN)
VDR
Intelligent HUB
HUB-3000
for FAR-3210(-BB)/3310, 12 kW
(w/ Performance Monitor PM-32A)
XN12CF-RSB128-105
XN20CF-RSB128-105
XN24CF-RSB128-105
Antenna Unit
for FAR-3220(-BB)/3320, 25 kW
(w/ Performance Monitor PM-32A)
XN12CF-RSB128-106
XN20CF-RSB128-106
Junction Box XN24CF-RSB128-106
RJB-001 6
Antenna Cable
Junction Box
RJB-001 6
PSU-014
POWER SUPPLY
UNIT
LAN Serial
250V-TTYCS-1Q
EC-3000
PROCESSOR
UNIT
100-115/220-230 VAC
1ø, 50-60 Hz
Serial 1 to 4
IEC 61162-2
(Gyrocompass 1 , AIS)
IEC 61162-1
2
(EPFS (Navigator),
SDME (Speed Log))
Serial 5 to 7
IEC 61162-1
2
(EPFS (Navigator),
SDME (Speed Log),
Echo Sounder, Wind,
Alarm 6 , Navtex, etc.)
Digital Out 1 to 6 5
1: System Fail
2: Power Fail
3: Normal Close 1
4: Normal Close 2
5: Normal Open 1
6: Normal Open 2
iii