Furuno Felcom 15 Operator's Manual page 135

16. Press the [↓] or [↑] key to choose "Regular Interval" or "Daily" as appropriate.
17. Press the [Enter] key to close the window.
18. Do one of the following depending on the selection you made at step 16.
"Regular Interval" selected at step 16
(1) Press the [ ] key to choose Interval Time.
(2) Press the [Enter] key to open the interval time entry window.
(3) Key in the interval time. The interval should be at least 10 minutes.
(4) Press the [Enter] key to close the window.
(5) Press the [ ] key to choose Report Times.
(6) Press the [Enter] key to open the report times entry window.
(7) Key in the report times, or press the [Back Space] key to display "---" to
choose "No Limit" to transmit data until the "Status" setting is turned OFF.
(8) Press the [Enter] key to close the window.
"Daily" selected at step 16
(1) Press the [ ] key to choose Start Time 1.
(2) Press the [Enter] key to open the start time entry window.
(3) Key in the start time, in 24-hour notation.
(4) Press the [Enter] key to close the window.
(5) If necessary key in start times for Start Time 2-4.
19. Press the [Esc] key to show the update window.
Data report menu (regular interval reporting)
20. Yes is selected; press the [Enter] key to register settings.
21. Press the [Esc] key twice to return to the standby display.
Data Report
Data Report Programming
OFF
Status
2
Report Length
Destination
DNID
LES ID
Member No.
Regular Interval
Activation
01:00
Interval Time
24 (- - - : No Limit)
Report Times
- - : - -
Start Time1
- - : - -
Start Time2
Start Time3 - - : - -
Start Time4 - - : - -
5. DATA REPORTING AND POLLING
Update
No
Yes
5-3