Automatic Printing Of Data Report, Polling Command - Furuno Felcom 15 Operator's Manual

5.1.3

Automatic printing of data report, polling command

Data reports and polling commands are automatically printed, in the default state.
If you do not require automatic printing of data reports or polling commands do
the following:
1. Press the [F8] key to open the Setup menu.
2. Press the [6] key to choose Auto Mode Setup.
3. Press the [↓] or [↑] key to choose Data Report & Polling Print.
4. Press the [Enter] key to open the options window.
5. Press the [↓] key to choose OFF. (Choose ON to automatically print data
report and polling command.)
6. Press the [Enter] key to close the window.
7. Press [Esc] key twice to return to the standby display.
Auto Mode Setup
Auto Log Print
Receive Alarm
Auto Receive Message Save
Auto Receive Message Print
Data Report & Polling Print
Auto EGC Message Save
Auto EGC Message Print
Auto mode setup menu
5. DATA REPORTING AND POLLING
OFF
OFF
OFF
OFF
OFF
5-7