Furuno Felcom 15 Operator's Manual page 102

4. INMARSAT C COMMUNICATIONS
13. Press the [Enter] key to open the confirmation window.
14. To request notification of delivery from the LES, choose ON. If not necessary
choose OFF.
15. Press the [Enter] key to close the window.
16. Press the [ ] key to choose Send Delay.
17. Press the [Enter] key to open the send delay entry window.
18. To send a message after a certain delay, enter a time up to 99 hours 59
minutes. (The Send Delay is used to time message arrival to suit recipient's
office hours.)
19. Press the [Enter] key to close the window.
20. Press the [ ] key to choose Delivery Delay.
21. Press the [Enter] key to open the delivery delay options window.
22. Delivery Delay requests the LES for "Immediate" or "Deferred" transmission
to the recipient designated. Press the [↑] or [ ] key to choose Immediate or
Deferred. For information on this service, consult with LES where message is
to be sent.
23. Press the [Enter] key to close the window.
24. Press the [ ] key to choose Code and press the [Enter] key.
25. Press the [↑] or [ ] key to choose "IA5 (for e-mail, fax) ", "ITA2 (for telex)" or
"DATA" as appropriate.
26. Press the [Enter] key to close the window.
27. Press the [ ] key to place the cursor on TRANSMIT.
28. Press the [Enter] key to open the start window.
29. Press the [Enter] key to send the message to the message queue. (To
escape, choose "No" and press the [Enter] key.) The message "Message is
entered in sending Queue. Press any key." appears.
Note 1: If some data has not been entered, the message "Input Error: xx."
Note 2: When you send a message which contains more than 32 KB of data,
4-6
Date 97-08-04
Time Priority 01:32 (UTC)
Normal
Message File
SEISETU.TXT
Position Station Name LAT
FURUNO
Destination Type LON
TELEX
Waypoint Prefix Code LAT
Country/Ocean Code LON
81
Course Station ID DEG
321
Speed Modem Type KTS
Current NCS Address 344 (IOR) LOGOUT
Current Channel Subject NCS CC
Current TDM Attach File NCS CC
MES Status LES ID Idle
303 (KDDI)
GPS Status Option ****
ON
Confirmation
00:00
DCE Memory Send Delay 32818 Bytes free
Immediate
Delivery Delay
IA5
Code
[ TRANSMIT ]
Transmit message screen
(xx: error content) appears.
the message "Message file is too large (but sent only with 32 KB)."
appears. The message is sent with only 32KB of data.
Transmit Message
BBER
C/N
Send level Size
RxIF AGC Level Cost ********.** (US$)
REF Offset Freq
Synthe 1st local
3rd local
Synthesizer
TX2nd Local
Antenna Power Supply
Water Temperature
Water Current
Direction
Speed
Depth
46
Start
No
Yes Yes