Furuno Felcom 15 Operator's Manual page 138

5. DATA REPORTING AND POLLING
"Daily" is selected at step 22
(1) Press the [
(2) Press the [Enter] key to open the start time entry window.
(3) Key in the start time.
(4) Press the [Enter] key to close the window.
(5) If necessary, key in the start time of Start Times 2-4.
25. Press the [ ] key to choose Report Contents.
26. Press the [Enter] key to open the report contents options window.
27. Press the [
the [Enter] key to close the window.
NAV:
NAV+SEA INF: Position, speed, course, water temperature, current, depth
NAV(R):
FILE:
28. Press the [Esc] key to show the update window.
29. Yes is selected; press the [Enter] key.
30. Press the [Esc] key twice to return to the standby display.
5-6
to choose Start Time 1.
or [ ] key to choose the contents of message report and press
Position, speed, course
Position, speed, course. The difference between this and "NAV"
above is that blank areas in data are shortened to lessen toll
charge.
Choose a file. (When chosen "FILE" is activated. Choose file
with cursor and press the [Enter] key.)
Message Report
12345678
PIN Code
Message Report Programming
ON
Status
Station Name FRNINMBTSTSES
Destination Type TELEX
Prefix Code
Country/Ocean Code 583
Station ID 343199710
Modem Type
Subject
303 (KDDI)
LES ID
Daily
Activation
01:00
Interval Time
Report Times 24 (- - - : No Limit)
Start Time1 08:00
Start Time2
Start Time3
Start Time4
Report Contents NAV
File
Message report screen
Update
Yes No