Furuno Felcom 15 Operator's Manual page 62

Inmarsat-c mobile earth station
Hide thumbs Also See for Felcom 15:
Table of Contents

Advertisement

2. SYSTEM INITIALIZATION
6. Press the [Enter] key to open the station group entry window.
7. Enter station group name, using up to five characters.
8. Press the [Enter] key to close the window.
9. Press the [↓] key to choose Station Name.
10. Press the [Enter] key to open the station name entry window.
11. Enter station name, using up to 15 characters.
12. Press the [Enter] key to close the window.
13. Press the [↓] key to choose Destination Type.
14. Press the [Enter] key to open the destination type window.
TELEX: Telex communication
FAX:
E-Mail: E-mail (electronic mail) Service
CSDN: Circuit Switched Data Network-not used.
PSDN: Packet Switched Data Network
X400:
DNID:
SPEC: Ship-to shore requests for safety service, accessed by using special
15. Press the [ ] or [ ] key to choose destination type desired.
16. Press the [Enter] key to close the window. Follow appropriate procedure on
the next several pages.
Procedure for Telex
1. Press the [ ] key to choose Country Code.
2. Press the [Enter] key.
3. For ship-to-shore telex, enter international telex country code; ship-to-ship
telex, enter ocean region. A list of international telex country codes appears
in the Appendix.
Ocean Region
AOR-East:
IOR:
4. Press the [Enter] key.
5. Press the [ ] key to choose Station ID.
2-30
Destination (communication) type options
Facsimile service
- to an office computer via a data network using X.25 standard.
For future use
Data Network ID. Not used.
2-digit codes
581 POR:
582
583 AOR-West: 584
TELEX
FAX
E-Mail
CSDN
PSDN
X400
DNID
SPEC
TELEX (Prefixed)
FAX
(Prefixed)
PSDN (Prefixed)
X400
(Prefixed)
DNID
(Prefixed)
SPEC
(Prefixed)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Felcom15

Table of Contents