System Setup; Setup Menu - Furuno Felcom 15 Operator's Manual

2. SYSTEM INITIALIZATION
2.1.2

System setup

The System Setup menu provides for input of date, time, operating mode, and
port function.
1. Press the [F8] key to choose the Setup menu.
File
1. Distress Alert Setup
2. System Setup
3. Editor Setup
4. Terminal Setup
5. EGC Setup
6. Auto Mode Setup
7. E-Mail Setup
8. Directories
9. Configuration
2. Press the [2] key to display the System Setup menu.
Entered at installation
(Cannot be changed.)
3. System Date & Time is selected; press the [Enter] key to open the date entry
window.
4. Enter the date with the numeric keys. (Entry of date is not necessary if a GPS
navigator is connected to the FELCOM 15.)
5. Press the [Enter] key to close the window. (Note that the IMN is entered
during installation. The IMN window cannot be opened.)
6. Press the [ ] key twice to choose MES Operation Mode.
2-2
Edit Transmit EGC
Setup
System Date & Time
IMN
MES Operation Mode
Nav Port
Active Port
Message Output Port
EGC Output Port
9. Configuration
Network Setup
Command Window
System setup menu
Setup
System Date & Time
IMN
MES Operation Mode
Nav Port
Active Port
Message Output Port
EGC Output Port
9. Configuration
Network Setup
Command Window
System setup menu, date entry window
Reports Logs Options

Setup menu

Setup
System Setup
03:11 02-02-25 (YY-MM-DD)
INMARSAT-C
OFF
INT
INT
INT
System Setup
02-02-25 (YY-MM-DD)
INMARSAT-C
OFF
INT
INT
INT
Setup Position StopAlarm