Table of Contents
Advertisement
[ENCRYPTION]
[DEFAULT KEY]
[KEY1] - [KEY4]
[KEY]
[EAP]
[USER NAME]
[PASSWORD]
10) Press as to select [STORE], and press the <ENTER> button.
f Press as to select [RETURN] and then press the <ENTER> button to return to the [Art-Net (WIRELESS
LAN)] screen (1/2).
11) When the confirmation screen is displayed, press qw to select [OK], and press the <ENTER> button.
Note
f When [USER3] is selected in the [NETWORK] menu → [WIRELESS LAN] (x page 78) and the network setting is changed, the address
is reflected in the network setting for this [WIRELESS LAN] setting.
f If the string of SSID exceeds 16 characters, the SSID is displayed in two lines.
86 - ENGLISH
Chapter 4 Settings — [NETWORK] menu
Select the encryption method used for the communication between the projector and the network.
[NONE]
[WEP]
[TKIP]
[AES]
Set a number from 1 to 4 for the default key.
It can be selected only when [AUTHENTICATION] is set to [OPEN] or [SHARED], and the encryption
method is [WEP].
Set WEP key to the key number selected in [DEFAULT KEY].
It can be selected only when [AUTHENTICATION] is set to [OPEN] or [SHARED], and the encryption
method is [WEP].
You can set a 64-bit or 128-bit WEP key. Enter five single-byte alphanumeric characters (10 digits for
hexadecimal) for 64-bit, or enter 13 single-byte alphanumeric characters (26 digits for hexadecimal)
for 128-bit.
Set the key.
It can be selected when [AUTHENTICATION] is set to [WPA-PSK] or [WPA2-PSK].
Enter 8 to 63 alphanumeric characters or 64-digit hexadecimal.
Select the EAP set for RADIUS server.
It can be selected when [AUTHENTICATION] is set to [WPA-EAP/WPA2-EAP], [WPA-EAP], or
[WPA2-EAP]. The types of EAP that can be selected are as follows.
[PEAP(MS-CHAPv2)], [PEAP(GTC)], [EAP-TTLS(MD5)], [EAP-TTLS(MS-CHAPv2)], [EAP-FAST(MS-
CHAPv2)], [EAP-FAST(GTC)]
Enter the user name to be used for authentication in single-byte alphanumeric characters (space not
included, 64 characters at the maximum).
It can be selected when [AUTHENTICATION] is set to [WPA-EAP/WPA2-EAP], [WPA-EAP], or
[WPA2-EAP].
Enter the password to be used for authentication in single-byte alphanumeric characters (64
characters at the maximum).
It can be selected when [AUTHENTICATION] is set to [WPA-EAP/WPA2-EAP], [WPA-EAP], or
[WPA2-EAP].
Select this item not to use encryption.
It can be selected only when [AUTHENTICATION] is set to [OPEN]
or [SHARED].
Select this item when the encryption method is WEP.
Select this item when the encryption method is TKIP.
It can be selected only when [AUTHENTICATION] is set to [WPA-
PSK], [WPA2-PSK], [WPA-EAP], or [WPA2-EAP].
Select this item when you use AES for the encryption method.
It can be selected only when [AUTHENTICATION] is set to [WPA-
PSK], [WPA2-PSK], [WPA-EAP], or [WPA2-EAP].
Advertisement
Table of Contents
