Table of Contents
Advertisement
Menu navigation
The on-screen menu (Menu) is used to perform various settings and adjustments of the projector.
Navigating through the menu
Operating procedure
When the projection mode is set to the projector mode, the [LIGHTING] menu is not displayed. Press the
<LIGHTING/PROJECTOR> button on the remote control and switch to the lighting mode before starting
operation. (x page 51)
button
1)
Press the <MENU> button on the remote control.
f The [MAIN MENU] screen is displayed.
2)
Press as on the remote control to select a main menu item.
f The selected item is highlighted by yellow cursor.
3)
Press the <ENTER> button on the remote control.
f The sub-menu items of the selected main menu are displayed.
4)
Press as on the remote control to select a sub-menu item, and press qw or the <ENTER> button to
change or adjust settings.
f Some items will switch in order as follows each time you press qw.
Chapter 4 Settings — Menu navigation
MAIN MENU (PROJECTOR)
PICTURE
MEMORY VIEWER
SETUP
NETWORK
DISPLAY OPTION
DISPLAY LANGUAGE
SECURITY
TEST PATTERN
MENU SELECT
SUB MENU
ENTER
MAIN MENU (PROJECTOR)
PICTURE
MEMORY VIEWER
SETUP
NETWORK
DISPLAY OPTION
DISPLAY LANGUAGE
SECURITY
TEST PATTERN
MENU SELECT
SUB MENU
ENTER
MEMORY VIEWER
VIEW
<
SORT
AUTOPLAY
INTERVAL
EFFECT
GUIDE
MENU SELECT
CHANGE
A
B
THUMBNAIL
>
NAME
OFF
OFF
ON
C
ENGLISH - 55
Advertisement
Table of Contents
