Table of Contents
Advertisement
Performing system settings
Perform the system settings of schedule.
r [System setting] page
1
2
3
4
5
6
7
1
[Time of change-of-day]
Sets the time for the start of a day.
2
[First day of week]
Sets the day of the week for the start of a week in the schedule.
3
[Operating time]
Sets the time slot to start signage playback (schedule).
It is used as the default power-on time of power supply content
set when a new timetable is created.
4
[Sound track]
Sets the music content to be played as BGM during the time
slot where no music content is registered in the timetable.
Click the [Reference] button to select music content from the
music content list.
If the check box is not selected, BGM is disabled.
5
[Effect]
Sets the default image effect (special effect used when
changing the playback screen) to be set when still image
content is registered.
For details of the setting items, refer to "[Effect]" (x page 197).
If the check box is not selected, the image effect of the still
image content registered in the timetable is disabled.
6
[Color]
Select the color setting to be reflected when playing image
content.
For details of the setting items, refer to "[Color]" (x page 198).
7
[Brightness]
Specifies the brightness to be reflected in the time slot where no
brightness content is registered in the timetable.
8
[Restart option]
As a condition to resume the paused signage playback, sets
enable/disable of [Power]/[Image content].
r Procedure
1)
Click the [System setting] tab.
f The [System setting] page is displayed.
2)
Perform various settings, and click the [Setting] button.
f Set contents are registered.
Note
f When [Power] and [Image content] in [Restart option] are set to [Enable] or [Disable], the following operations are applied.
Chapter 5 Operations — Content Manager
9
[Fixed loading time]
Select whether to fix the loading time after starting the
scheduled movie content till displaying the image on the
projection screen.
[Enable]:
Fixes the loading time after starting playback till displaying the
image to three seconds.
[Disable]:
Displays the image as soon as the movie content has been
loaded from the SD card after playback starts. Depending
on the content, the loading time after starting playback till
displaying the image will be less than three seconds.
10 [Duration setting] - [Still]
Sets the default playback time to be set when still image
content is registered.
11 [Duration setting] - [Input]
Sets the default playback time which is set when external input
content is registered.
12 [Duration setting] - [Brightness]
Sets the default playback time which is set when brightness
content is registered.
13 [Duration setting] - [Power]
Sets the default playback time which is set when power supply
content is registered.
14 [Setting] button
Click this to confirm the settings.
15 [Undo] button
Click this to undo the entered setting to the state before change.
8
9
10
11
12
13
14
15
ENGLISH - 177
Advertisement
Table of Contents
