Table of Contents
Advertisement
Connecting with wired LAN
1
[DHCP ON], [DHCP OFF]
To enable the DHCP client function, set [DHCP ON].
2
[IP ADDRESS]
Enter the IP address when not using a DHCP server.
3
[SUBNET MASK]
Enter the subnet mask when not using a DHCP server.
4
[DEFAULT GATEWAY]
Enter the default gateway address when not using a DHCP
server.
Note
f When you use the "Forward" or "Back" functions of your browser, a warning message "Page has Expired" may appear. In that case, click
[Network config] again as the subsequent operations will not be guaranteed.
f Changing LAN settings while connected to the LAN may cause the connection to cut out.
Connecting with wireless LAN (M-DIRECT)
1
[IP ADDRESS]
Enter the IP address.
2
[SUBNET MASK]
Enter the subnet mask.
3
[SSID]
Set SSID to be used with M-DIRECT.
4
[CHANNEL]
Set the channel to be used with M-DIRECT.
Chapter 5 Operations — Web control function
1
2
3
4
5
6
5
[DNS1], [DNS2]
Enter the primary DNS/secondary DNS server address when
you do not use a DHCP server.
Available characters: Numbers (0 - 9), period (.)
(Example: 192.168.0.253)
6
[Back] button, [Next] button
Click the [Back] button to return to the previous screen. Click
the [Next] button to display a screen to confirm the settings.
Click the [Submit] button to update the settings.
1
2
3
4
5
6
5
[KEY]
Set the key to be used with M-DIRECT.
Enter 8 to 63 alphanumeric characters or 64-digit hexadecimal.
6
[Back] button, [Next] button
Click the [Back] button to return to the previous screen. Click
the [Next] button to display a screen to confirm the settings.
Click the [Submit] button to update the settings.
ENGLISH - 113
Advertisement
Table of Contents
