Table of Contents
Advertisement
2)
Enter "http://xxx.xxx.xxx.xxx/signage/" in the URL entry field of the web browser.
f xxx.xxx.xxx.xxx is the IP address set in the projector.
f The login screen is displayed.
3)
Click [Login].
4)
Enter the user name and the password.
f The factory default setting of the user name is user1 (user rights)/admin1 (administrator rights) and the
password is panasonic (lower case).
5)
Click the [OK] button.
f The start screen is displayed.
6)
Click [Schedule] or [Slideshow].
f The [Schedule] screen or the [Slideshow] screen is displayed.
Note
f Log in with the administrator rights first, and click [Schedule] to change the password. ("Changing login information" (x page 181))
f The user name/password of the Content Manager are managed separately from the user name/password of the web control function.
f One person each can log in with administrator rights and with user rights. Two people cannot log in with the same rights, or more than three
people cannot log in at the same time.
f If you log in with the administrator rights, you can use all Content Manager functions. If you log in with the user rights, you can check
registered schedules or timetables, and the content of preset slideshow, but cannot register, edit, or play them.
f When no SD card is inserted in the SD card slot, or the projector cannot recognize the SD card, the person will be logged out forcibly.
f If the Content Manager screen is not displayed, consult your network administrator.
130 - ENGLISH
Chapter 5 Operations — Content Manager
Advertisement
Table of Contents
