Table of Contents
Advertisement
f The [USER] setting is shared with [User P] in the Content Manager. Changes to the [USER] setting are also reflected in [User P]. ("[Color]"
(x page 198))
Adjusting desired white balance
1)
Press as to select [COLOR TEMPERATURE].
2)
Press qw or the <ENTER> button.
f The [COLOR TEMPERATURE] individual adjustment screen is displayed.
3)
Press qw to select [USER].
4)
Press the <ENTER> button.
f The [COLOR TEMPERATURE] screen is displayed.
5)
Press as to select [RED], [GREEN], or [BLUE].
6)
Press qw to adjust the level.
Item
[RED]
[GREEN]
[BLUE]
Note
f Adjust [COLOR TEMPERATURE] correctly. All colors will not be displayed properly unless adequate adjustment is made. If the adjustment
does not look suitable, you can press the <DEFAULT> button on the remote control to return the setting for the selected item only to the
factory default setting.
f The setting of [COLOR TEMPERATURE] is not reflected in internal test patterns (x page 91). Make sure to set [COLOR
TEMPERATURE] while the input signal is projected.
[DIMMER]
Adjust the brightness.
1)
Press as to select [DIMMER].
2)
Press qw or the <ENTER> button.
f The [DIMMER] individual adjustment screen is displayed.
3)
Press qw to adjust the level.
Operation
Press w.
Press q.
Note
f Video images may appear reddish depending on the set value.
f The set value for [DIMMER] is reflected in [DIMMER] (x page 62) in [LIGHTING].
Chapter 4 Settings — [PICTURE] menu
Operation
Press w.
Press q.
Press w.
Press q.
Press w.
Press q.
Adjustment
Makes brighter.
Makes darker.
Adjustment
Deepens red.
Weakens red.
Deepens green.
Weakens green.
Deepens blue.
Weakens blue.
Range of adjustment
0 - +255
(Factory default is +255)
Range of adjustment
0 - +100
(Factory default is +100)
ENGLISH - 65
Advertisement
Table of Contents
