Table of Contents
Advertisement
f Work of electrical wiring must be performed by qualified personnel only.
f Panasonic takes no responsibility for any damage to the projector caused by mounting the product to ceiling in
any method not specified by Panasonic or caused by inappropriate installation environment, even if the warranty
period of the projector has not expired.
rWhen using the optional Ceiling Kit, do not install the projector on a sloped ceiling
exceeding 45°, wall, or floor.
0° to maximum 45°
Ceiling
Can be installed
rDo not install the projector on a ceiling with the power supply unit tilted right or left.
Power
supply unit
Can be installed
rWhen installing the projector on a sloped ceiling, install in a direction that the pole
side of the power supply unit will be higher than the power <v/b> button side.
Pole side
Power < v / b > button side
Can be installed
rWhen using the projector in combination with the optional Floor Stand Kit, install on a
horizontal surface.
rWhen using the projector in combination with the optional Floor Stand Kit, use the
power cord supplied with the optional accessories, and ground at the outlet side.
rFocus adjustment
The projection lens is thermally affected by the light from the light source, making the focus unstable in the period
just after switching on the power. It is recommended that images be projected continuously for at least 30 minutes
before the focus is adjusted.
rCautions when setting up the projector
f Do not block the ventilation ports (intake and exhaust) of the projector.
18 - ENGLISH
Chapter 1 Preparation — Precautions for use
Exceeding 45°
Ceiling
Cannot be installed
Ceiling
Cannot be installed
Power supply unit
Ceiling
Wall
Cannot be installed
Cannot be installed
Cannot be installed
Floor
Cannot be installed
Advertisement
Table of Contents
