Table of Contents
Advertisement
Initial setting (standby mode)
Set the operation mode during the standby. The default setting is [ECO] that keeps power consumption low
during standby. If you use the network function during standby, set to [NORMAL]. If you want to keep the power
consumption low during standby, and to perform operation of power-on via wired LAN, set to [NETWORK]. Once
the initial setting is completed, setting can be changed from the [SETUP] menu → [ECO MANAGEMENT] →
[STANDBY MODE].
1)
Press qw on the remote control to switch the setting.
2)
Press the <ENTER> button on the remote control to perform next initial setting.
Note
f The above initial setting screen is the one displayed when the projector is turned on for the first time after purchase. When [ALL USER
DATA] is executed from the [SETUP] menu → [INITIALIZE], the [STANDBY MODE] setting before the execution is displayed.
Initial setting (time zone)
Set [TIME ZONE] according to the country or region where the projector is used.
Once the initial setting is completed, setting can be changed from the [SETUP] menu → [DATE AND TIME].
The current settings are displayed in the [LOCAL DATE] and the [LOCAL TIME]. If a change is necessary, set with
the [SETUP] menu → [DATE AND TIME] after completing the initial setting.
1)
Press qw on the remote control to switch the setting.
2)
Press the <ENTER> button on the remote control.
f Confirm the setting value and complete the initial setting.
Note
f In the factory default setting, the time zone of the projector is set to +09:00 (Japan and Korean Standard Time). Change the time zone
according to the region where you use the projector.
44 - ENGLISH
Chapter 3 Basic Operations — Turning on/off the projector
INITIAL SETTING
STANDBY MODE
Please set the power setting at standby mode. Network
function will be restricted when it sets to ECO or Network.
SET
ENTER
INITIAL SETTING
TIME ZONE
LOCAL DATE
LOCAL TIME
Please set up a time zone according to the area of your
country or region.
SET
ENTER
3/4
<
ECO
>
CHANGE
4/4
<
+09:00
>
2014/01/01
00:00:00
CHANGE
Advertisement
Table of Contents
